Previous Up Next
The MOVE class of instructions perform full word data transmission between an accumulator and a memory location. There are sixteen instructions in the MOVE class. All mnemonics begin with MOV. The first modifier specifies a data transformation operation; the second modifier specifies the source of data and the destination of the result.
|E no modification | from memory to AC MOV |N negate source |I Immediate. Move the address to AC. |M magnitude |M from AC to memory |S swap source |S to self. If AC#0, move to AC also"Magnitude" means that the absolute value of the input quantity is what is stored in the output.
"Swap Source" means that the right and left halves of the input quantity are interchanged before storing into the output.
In a "to self" instruction, the input value (negated, swapped, or the magnitude, if appropriate) is stored back into the memory location; if the AC field is nonzero, the value is stored in the AC as well.
MOVE C(AC) <- C(E) MOVEI C(AC) <- 0,,E MOVEM C(E) <- C(AC) MOVES C(E) <- C(E); if AC#0 then C(AC) <- C(E) MOVN C(AC) <- -C(E) MOVNI C(AC) <- -E MOVNM C(E) <- -C(AC) MOVNS C(E) <- -C(E); if AC#0 then C(AC) <- -C(E) MOVM C(AC) <- |C(E)| MOVMI C(AC) <- 0,,E MOVMM C(E) <- |C(AC)| MOVMS C(E) <- |C(E)|; if AC#0 then C(AC) <- |C(E)| MOVS C(AC) <- CS(E) MOVSI C(AC) <- E,,0 MOVSM C(E) <- CS(AC) MOVSS C(E) <- CS(E); if AC#0 then C(AC) <- CS(E)EXCH exchanges the contents of the selected ac with the contents of the effective address.
EXCH C(AC)><C(E)The BLT (Block Transfer) instruction copies words from memory to memory. The left half of the selected AC specifies the first source address. The right half of the AC specifies the first destination address. The effective address specifies the last destination address. Words are copied, one by one, from the source to the destination, until a word is stored in an address greater than or equal to the effective address of the BLT.
Caution: BLT clobbers the specified AC. Don't use the BLT AC in address calculation for the BLT; results will be random. If source and destination overlap, remember that BLT moves the lowest source word first. If the destination of the BLT includes the BLT AC, then the BLT AC better be the last destination address.
;Save all the accumulators: MOVEM 17,SAVAC+17 MOVEI 17,SAVAC ;Source is 0, destination is SAVAC BLT 17,SAVAC+16 ;Restore all the accumulators: MOVSI 17,SAVAC ;Source is SAVAC, destination is 0 BLT 17,17 ;Zero 100 words starting at TABLE. SETZM TABLE MOVE AC,[TABLE,,TABLE+1] ;Source and destination overlap BLT AC,TABLE+77 ;Move 77 words from TABLE thru TABLE+76 to TABLE+1 thru TABLE+77: BLT ;can't be done here because the source and destination overlap. (See ;the description of POP, *Note POP: Stack.) MOVE AC,[400076,,TABLE+76] POP AC,1(AC) ;Store TABLE+76 into TABLE+77, etc. JUMPL AC,.-1